You are not logged in to Prodigits. Please register or login. You are not logged in to Prodigits. Please register or login.
Subject: cpu temp?
Replies: 24 Views: 2412
pikkie42 11.08.12 - 02:16pm
I have a Gigabyte board with dual cpu and dual BIOS,but cpu 1 runs at 97 degrees and cpu 2 only at 42 degrees? Why does it run at such a high temp and is this too high for a CPU? * +
k155m1a5 11.08.12 - 02:20pm
degrees what? C or F, then again either way it seems to high 30c to 45c is about average, but note cpu1 will always be higher than the rest as it does most of the work, the other cpu's take over the strain when cpu1 is running to much stuff * +
pikkie42 11.08.12 - 02:26pm
should I then be worried about the temp of cpu1? * +
sisfake 11.08.12 - 02:57pm
If Its farenheit then its okay , if it was celsius it would have been start melting some
* +
pikkie42 11.08.12 - 03:01pm
it is celcius! why does it run so high? both are 1 ghz processors and board is set to run at 1000 mhz? is this the problem? should I reduce it? Could the hardware monitor be displaying incorrect temps? * +
sisfake 11.08.12 - 03:11pm
your heatsink must be loose or the temperature is being read incorrectly try another program , maybe the thermistor sensor is d * +
pikkie42 11.08.12 - 03:12pm
oi? where are the gurus? :-( * +
pikkie42 11.08.12 - 03:15pm
heatsink is on and clamped down,althoug very little paste on? but the heatsink also feels only warm to the touch? * +
+ go to page 1-4
+ my page
+ functions
3 search
4 submit a reply
7 last page
+ bookmark
8 Tech&Computers Forum
9 Forum Index
