You are not logged in to Prodigits. Please register or login.

Subject: Bottlenecking
Replies: 198 Views: 8814

chr1s84 17.02.10 - 03:14pm
Hi guys n gals, i was wondering what games do i need to look out for when it comes to Bottlenecking!! * +

chr1s84 17.02.10 - 03:17pm
I have a Core i7 920 @ 3.2ghz (Safe Overclock) Ati 5870 (Was running 2 But had to sell 1 for quick cash)6Gb 1333mhz ram * +

jay.mack 17.02.10 - 03:36pm
at 3.2 you wont see any bottleknecks hopfully, my issue was with cod4 but it dissapeard at 3.2. * +

jay.mack 17.02.10 - 03:48pm
blck set to 166, mem multi at x8, uncore x16, gives 3.333ghz cpu 1333mhz memory (numbers may vary a little due to rounding up or down) uncore must be set at a minimum of x2 the mem multiplyer or the system wont boot. * +

jay.mack 17.02.10 - 03:54pm
volts: i set my cpu at 1.18125v which is the stock auto setting (but set manualy) mem is set to 1.64v (gigabyte UD5 boards dont do 1.65) qpi pll 1.84 qpi volts 1.24 (this must be within .5v of the memory volts) all other settings are taken off auto and set manualy to what the auto setting was. finaly turn off turboboost mode and set performance to standard, turn off c1 halt state, its up to you * +

jay.mack 17.02.10 - 03:55pm
if you want to turn multithreading on or off. these are my settings and you use them at your own risk, dont blame me if you set sumthing different and it goes pop. * +

jay.mack 17.02.10 - 04:00pm
http://www.xbitlabs.com/articles/cpu/display/core-i7-920-overclocking.html i recomend you read this article. i cant vouch for its validity as i havent got an azus board but it seemes to be correct, if you follow it make sure you ask any of the guys that have i7's and overclocked em, spartan2, lrdbyron,djtaktix there opinions do not listen to guys that havent got 1 or have just read articles... * +

jay.mack 17.02.10 - 04:05pm
when i asy auto settings. look at the value that auto setts sumthing at, then open the option you want to chance and replace auto with that setting. so cpu core volts 1.18125 - (auto), becomes cpu core volts 1.18125 - 1.18125 do this with all the auto set settings. because if you dont volts may get set a lot higher than is safe. when i say all i mean all, no exeptions. * +

+ go to page 1-29
+ my page
+ functions
3 search
4 submit a reply
7 last page
+ bookmark
8 Tech&Computers Forum
9 Forum Index

Custom Search