You are not logged in to Prodigits. Please register or login.

Subject: Hdd master/slave
Replies: 6 Views: 344

mike7610 4.01.10 - 09:47pm
I have 3 hdd on my pc,two wd 640 gb and one hitachi 1tb. How to make an order for them? I tried in bios but no luke. I set fist boot one of the 640gb and when i try to instal the first is that of 1tb. Pls help. * +

sata 4.01.10 - 10:47pm
if they are all sata drives try check motherboard sata order to get boot order * +

metulj 4.01.10 - 11:48pm
some bioses do have settings for disk order... yet it's funny.. as if they are S-ATA.. thats really not needed... now the question is.. what do you trying to install? do you see all disks during installation? * +

mike7610 5.01.10 - 05:13am
Yes. I see all disks and partitions but they are chainging the order themselfs. In main hdd i have now the windows in D not in C . When i open my computer the order is C,D,E but when i try to reinstal windows,at the step when i'm asked to chouse the partision the order is D,C,E ! Why ? * +

mike7610 5.01.10 - 09:49pm
No 1 ? * +

metulj 5.01.10 - 11:27pm
having windows installed on D: is wrong... system(any windows for sure) should be on C: always ! now read your reply again.. and theres also answer to your question.. * +

jay.mack 6.01.10 - 01:03am
you installed the disks in the wrong order you have the d drive on the wrong connection and the wrong jumper if its ide. if its sata then you have it on a slave sata port. swap the leads over and select the drive prioritys in bios make sure you have the windows on the first primary and set as the primary, you also have to make sure that the windows is the system disk. *

+ refresh
+ my page
+ functions
3 search
4 submit a reply
+ bookmark
8 Tech&Computers Forum
9 Forum Index

Custom Search